2010 Dodge Ram Headlight Removal. Web in this video we show how to remove the front grille assembly and headlights in order to change the bulbs on your 2009 2010 2011 2012 2013 2014 2015 2017 201. Work small amounts of polish into the lens one at a.
If you have been driving your dodge ram for a while, your headlights may start misbehaving by going on and off without you touching. Easy step by step instructions. Headlights going on and off occasionally.
You will need to remove the front grill (4 10mm bolts and 4 plastic body. Locate the green turn signal wire clamp. Remove the old headlight assembly.
Web paul shows how to replace your headlight or just your bulb and breakes it down so you can see exactly how to do it like a pro. Hope this saves everyone some time. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.
High beams are a bugger, but removing stuff from the inside to get to them is possible. Set them some place safe. Locate the two bolts on the top of the assembly and remove them with your wrench or socket.
Web low beams can be accessed by removing the inner fender liner. Disconnect and isolate the negative battery cable. Easy step by step instructions.
Web you have to pull the grill straight out. Before beginning, make sure your truck is turned off and the engine has cooled. Web how to remove headlights without removing the grill!!!big thanks to corneileous from dodge ram forums for telling me this.
